Shallow Well Jet Pumps, 1/2 - 1 HP Thermoplastic
PRODUCT ID: MPN Series - Myers

MPN Series Shallow Well Jet Pumps are corrosion- and abrasion-resistant and are ideal for wells with pumping levels of 25' or less.

Self-priming after the pump housing is initially filled with water.

Capacities to 18 GPM at 30 PSI.  Available in 1/2, 3/4, and 1 HP models

Supplied with the industry standard 30-50 pressure switch setting

KEY FEATURES
  • Fiberglass-reinforced thermoplastic body provides total corrosion resistance and high resistance to abrasion
  • Shallow-well jet has corrosion-resistant polypropylene nozzle and venturi
  • Precision-molded impeller for perfect balance... ultra-smooth for highest performance and efficiency
  • Precision-molded polypropylene diffuser allows pump to prime faster, handle more air
  • Heavy-duty motor with stainless steel shaft and dual heavy-duty ball bearings
  • Dual voltage capability on all horsepowers. Factory preset to 230v but can be set to 115v easily
  • Pressure switch set to 30-50 PSI but adjustable
  • Easy removal of a single plug allows for nozzle clean-out
  • Bottom-mounted drain plug allows for easy draining and winterization
Warranty
Whichever comes first: 12 months from date of original installation, or 18 months from date of manufacture See your dealer for details
CHAT
PERFORMANCE CURVES
TECHNICAL DOCUMENTS
VIDEOS
ACCESSORIES
ACCESSORIES
No Attached Documents.
PERFORMANCE CURVES FOR SHALLOW WELL JET PUMPS, 1/2 - 1 HP THERMOPLASTIC
ENCOMPASS 2.0 SIZING TOOL
1272
Sell sheets, dimensions, manuals, etc will be in this section.
DIMENSIONS / SPECIFICATIONS

 

BODY CONSTRUCTION:  Fiberglass-reinforced thermoplastic

HORSEPOWER:  Available in 1/2, 3/4, or 1 HP

MAXIMUM CAPACITY:  18 GPM (model MPNE)

FLOW at 10' LIFT and 40 PSI:  10.2 GPM average (model MPND)

MAX LIFT:  25'

MAX SHUT-OFF PRESSURE:  78 PSI (model MPND)

MAXIMUM INLET PRESSURE:  22 PSI

PRESSURE SWITCH SETTINGS:  30 - 50 PSI

SUCTION SIZE:  1-1/4" NPT (female)

DRIVE SIZE:  n/a

DISCHARGE SIZE:  1" NPT (female)

AMP DRAW (full load):  14.8 max (model MPNE on 115v)

VOLTAGE:  230v/115v Dual Voltage Motors

RECOMMENDED BREAKER:  Depends upon Voltage and Horsepower

MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)

IMPELLER:  Engineered polymer

BASE:  10-gauge steel

NOZZLE, VENURI, AND DIFFUSER:  Polypropylene

DOWNLOADS
Owner's Manual: MPN Series, MFN Series
DOWNLOAD MANUAL
Specifications: MPN Series
DOWNLOAD SPECS
More Resources Available In Our Resource Center
GO TO RESOURCE CENTER
No Videos.
FIND A DEALER NEAR YOU
Our support team is here to help with online chat, by telephone (800-782-7483), or leave us a message below.
LOCATE A DEALER
TELL US WHAT YOU NEED
Copy on customer support, contact our team or chat online to get detailed information that suits your specific needs.
CONTACT US
FREQUENTLY ASKED QUESTIONS
For answers to commonly asked questions or to find out more about our services, please use our FAQ.
VIEW FAQ
BROWSE PRODUCTS
SEARCH

OFFICES

USA - RESIDENTIAL

293 Wright Street
Delavan, WI 53115
Phone: 888-987-8677
Orders Fax: 800-426-9446

USA - ENGINEERED

Orders and Technical Support
1101 Myers Parkway
Ashland, OH 44805
Hours: 7:30AM - 5:00PM EST
Phone: 855-274-8948
Fax: 419-281-9978

CANADA - RESIDENTIAL

490 Pinebush Road, Unit 4
Cambridge, Ontario, Canada, N1T 0A5
Phone: 800-363-7867
Orders Fax: 888-606-5484

CANADA - ENGINEERED

490 Pinebush Road, Unit 4
Cambridge, Ontario, Canada N1T 0A5
Hours: 8:00AM - 4:30PM EST
Phone: 1-800-363-7867 or 519-623-8434
Fax: 1-888-606-5484 or 519-623-8434

LEAVE US A MESSAGE

Please fill in all the fields!