5HP Centrifugal Grinder Vortex Impeller
PRODUCT ID: WG50-WGX50 - Myers

5HP Centrifugal Grinder Vortex Impeller

The Myers WG50/WG50X are rugged 5 horsepower submersible centrifugal grinder pumps designed for residential, light commercial, industrial or municipal applications. They are especially designed for grinder pump applications requiring higher flows at low to moderate heads. The WG50 features a heavy-duty cutter mechanism and recessed impeller design to efficiently grind typical sewage into a fine slurry.

KEY FEATURES
  • Capacities To 185 gpm (693 lpm)
  • Pressure To 92 ft. of head (28.1 m)
  • Liquids Handling
    -- domestic raw sewage
  • Intermittent Liquid Temp. up to 140ºF (up to 60ºC)
  • Winding Insulation Temp. (Class F) 311ºF (155ºC)
  • Motor Electrical Data (Single phase motors are capacitor start type. Myers control panels or capacitor kits are recommended for proper operation and warranty.)
    -- 3450 RPM: 3–5 HP, 1 ph, 230 volt 3 ph, 200/230/460 volt 60 Hz
  • Std. Third Party Approvals CSA
  • Optional Approvals FM, Class 1, Group D (WGX30-50)
  • Acceptable pH Range 6 – 9
  • Specific Gravity .9 – 1.1
  • Viscosity 28 – 35 SSU
  • Discharge (Flange Dia.) 2½ (63.5 mm)
  • Min. Sump Diameter
    -- Simplex 36 in. (91.4 cm)
    -- Duplex 48 in. (121.9 cm)
  • Recessed impeller provides steep non-overloading operating curve.
  • Oil-filled motor for max. heat dissipation and constant bearing lubrication.
  • Recessed impeller reduces radial bearing loads, increases bearing life.
  •  High torque capacitor starts single phase or three phase motors for assured starting under heavy load.
  • Seal leak probe warns of leak condition, prevents costly motor damage.
  • On-winding temperature-sensitive sensor.
  • Shredding ring and grinding impeller are replaceable without dismantling pump or motor.
Warranty
1-year limited warranty
CHAT
PERFORMANCE CURVES
TECHNICAL DOCUMENTS
VIDEOS
ACCESSORIES
PERFORMANCE CURVES FOR 5HP CENTRIFUGAL GRINDER VORTEX IMPELLER
No Attached Documents.
ENCOMPASS 2.0 SIZING TOOL
No Videos.
FIND A DEALER NEAR YOU
Our support team is here to help with online chat, by telephone (800-782-7483), or leave us a message below.
LOCATE A DEALER
TELL US WHAT YOU NEED
Copy on customer support, contact our team or chat online to get detailed information that suits your specific needs.
CONTACT US
FREQUENTLY ASKED QUESTIONS
For answers to commonly asked questions or to find out more about our services, please use our FAQ.
VIEW FAQ
BROWSE PRODUCTS
SEARCH

OFFICES

USA - RESIDENTIAL

293 Wright Street
Delavan, WI 53115
Phone: 888-987-8677
Orders Fax: 800-426-9446

USA - ENGINEERED

Orders and Technical Support
1101 Myers Parkway
Ashland, OH 44805
Hours: 7:30AM - 5:00PM EST
Phone: 855-274-8948
Fax: 419-281-9978

CANADA - RESIDENTIAL

490 Pinebush Road, Unit 4
Cambridge, Ontario, Canada, N1T 0A5
Phone: 800-363-7867
Orders Fax: 888-606-5484

CANADA - ENGINEERED

490 Pinebush Road, Unit 4
Cambridge, Ontario, Canada N1T 0A5
Hours: 8:00AM - 4:30PM EST
Phone: 1-800-363-7867 or 519-623-8434
Fax: 1-888-606-5484 or 519-623-8434

LEAVE US A MESSAGE

Please fill in all the fields!